Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.     

Distribution of antibiotic-resistant bacteria in chicken manure and manure-fertilized vegetables

Veterinary manure is an important pollution reservoir of antibiotics and antibiotic-resistant bacteria (ARB). However, little is known of the distribution of ARB in plant endophytic bacteria and the number/types of ARB in chicken manure. In this study, 454-pyrosequencing was used to investigate the distribution and composition of ARBs in chicken manure and fertilized vegetables. The prevalence of ARB in the samples of the chicken manure compost recovered from farms on which amoxicillin, kanamycin, gentamicin, and cephalexin were used was 20.91–65.9 % for ARBs and 8.24–20.63 % simultaneously resistant to two or more antibiotics (multiple antibiotic resistant bacteria (MARB)). Antibiotic-resistant endophytic bacteria were widely detected in celery, pakchoi, and cucumber with the highest rate of resistance to cephalexin. The pyrosequencing indicated that the chicken manure dominantly harbored Firmicutes, Bacteroidetes, Synergistetes, and Proteobacteria and that Bacteroidetes was significantly enhanced in farms utilizing antibiotics. In the total cultivable colonies, 62.58–89.43 % ARBs and 95.29 % MARB were clustered in Bacteroidetes with the dominant species (Myroides ordoratimimus and Spningobacterium spp., respectively) related to human clinical opportunistic pathogens.     

衡水市空气主要污染物体积质量的时间分布特征

利用衡水市环境监测站2005—2007年度大气例行检测的数据，对衡水市大气中主要污染物SO^2、NO^2、PM10体积质量值的逐日数据进行统计分析，得出了衡水市空气污染的现状和时间变化规律：（1）污染物体积质量值的月变化曲线呈槽型分布，非取暖期的空气状况明显好于取暖期，取暖期SO^2平均体积质量是非取暖期的2．45倍；（2）污染物体积质量值的日变化曲线基本为两高两低型，其中取暖期污染指数早晨出现极高值的时间比非取暖期明显偏晚；（3）污染物体积质量值的年变化表明了SO^2的体积质量在降低，而NO^2的体积质量却有了小幅增长。     

Pollution characteristics of ambient volatile organic compounds (VOCs) in the southeast coastal cities of China

With the rapid urbanization, the southeast coastal cities of China are facing increasing air pollution in the past decades. Large emissions of VOCs from vehicles and petrochemical factories have contributed greatly to the local air quality deterioration. Investigating the pollution characteristics of VOCs is of great significance to the environmental risk assessment and air quality improvement. Ambient VOC samples were collected simultaneously from nine coastal cities of southeast China using the Tedlar bags, and were subsequently preprocessed and analyzed using a cryogenic preconcentrator and a gas chromatography–mass spectrometry system, respectively. VOC compositions, spatial distributions, seasonal variations and ozone formation potentials (OPFs) were discussed. Results showed that methylene chloride, toluene, isopropyl alcohol and n-hexane were most abundant species, and oxygenated compounds, aromatics and halogenated hydrocarbons were most abundant chemical classes (62.5–95.6 % of TVOCs). Both industrial and vehicular exhausts might contribute greatly to the VOC emissions. The VOC levels in the southeast coastal cities of China were sufficiently high (e.g., 6.5 μg?m^?3 for benzene) to pose a health risk to local people. A more serious pollution state was found in the southern cities of the study region, while higher VOC levels were usually observed in winter. The B/T ratio (0.26?±?0.09) was lower than the typical ratio (ca. 0.6) for roadside samples, while the B/E (1.6–7.6) and T/E (7.2–26.8) ratios were higher than other cities around the world, which indicated a unique emission profile in the study region. Besides, analysis on ozone formation potentials (OFPs) indicated that toluene was the most important species in ozone production with the accountabilities for total OFPs of 22.6 to 59.6 %.     

树脂吸附-Fenton 试剂氧化法预处理炼油碱渣废水

采用树脂吸附-Fenton 试剂氧化组合工艺对某炼油企业炼油碱渣废水进行预处理.实验确定的最佳工艺条件为:3 种树脂串联吸附,废水流量0.33 mL/ min,H2O2加入量0.20 mol / L,n（H2O2）1 n（Fe2 +）= 12,Fenton 试剂氧化进水pH 3,Fenton 试剂氧化反应时间120 m...     

水平潜流人工湿地在不同水力负荷下的水力效率及可视化分析

构建水平潜流人工湿地装置,通过NaCl示踪脉冲实验,得到不同水力负荷条件下的水力停留时间分布密度曲线,根据不同停留时间的关系计算相对水力效率,并利用染料,进行不同水力负荷下的可视化示踪实验,通过MATLAB处理得到高对比度的流态图像。观察"死区"分布,计算"死区"相对面积用以表征其水力效率。结果表明,湿地装置进水水力负荷较高或较低时,水力效率均较低,且水力负荷较大时更明显;水力分布散度(σ2θ)的大小会对水平潜流人工湿地水力效率造成较大影响;在不同水力负荷下,采用水力学效能(λ)所得到的排序结果相比短路值(s)和有效体积比(e)更能代表实际水平潜流人工湿地的水力效率。     

紫外—荧光检测器高效液相色谱法测定PM2.5中16种多环芳烃

建立了一种利用高效液相色谱(HPLC)同时分离和测定大气颗粒物中16种优控多环芳烃(PAHs)的方法。样品经二氯甲烷超声提取,浓缩后经乙腈定容,以乙腈和水作为流动相进行反相HPLC梯度淋洗分离后,由紫外检测器串联程序波长荧光检测器检测。通过实验条件的优化,实现了16种PAHs组分基线完全分离和高灵敏度检测。16种PAHs检测限为0.05～1.20μg/L,回收率在75.0%～106.0%,相对标准偏差在0.27%～7.42%,均符合方法学的要求。将该方法用于测定贵阳市不同功能区PM2.5中PAHs的含量,具有快速简便、准确灵敏、重现性好等优点,适合大批量样品的分析。     

Evaluation of airborne particulate matter and metals data in personal,indoor and outdoor environments using ED-XRF and ICP-MS and co-located duplicate samples

Factors and sources affecting measurement uncertainty associated with monitoring metals in airborne particulate matter (PM) were investigated as part of the Windsor, Ontario Exposure Assessment Study (WOEAS). The assessment was made using co-located duplicate samples and a comparison of two analytical approaches: ED-XRF and ICP-MS. Sampling variability was estimated using relative percent difference (RPD) of co-located duplicate samples. The comparison of ICP-MS and ED-XRF results yields very good correlations (R² ≥ 0.7) for elements present at concentrations that pass both ICP-MS and ED-XRF detection limits (e.g. Fe, Mn, Zn, Pb and Cu). PM concentration ranges (median, sample number) of 24-h indoor PM₁₀ and personal PM₁₀ filters, and outdoor PM_2.5 filters were determined to be 2.2–40.7 (11.0, n = 48) μg m^?3, 8.0–48.3 (11.9, n = 48) μg m^?3, and 17.1–42.3 (21.6, n = 18) μg m^?3, respectively. The gravimetric analytical results reveal that the variations in PM mass measurements for same-day sampling are insignificant compared to temporal or spatial variations: 92%, 100% and 96% of indoor, outdoor and personal duplicate samples, respectively, pass the quality criteria (RPD ≤ 20%). Uncertainties associated with ED-XRF elemental measurements of S, Ca, Mn, Fe and Zn for 24-h filter samples are low: 78%–100% of the duplicate samples passed the quality criteria. In the case of 24-h filter samples using ICP-MS, more elements passed the quality criteria due to the lower detection limits. These were: Li, Na, K, Ca, Si, Al, V, Fe, Mn, Co, Cu, Mo, Ag, Zn, Pb, As, Mg, Sb, Sn, Sr, Th, Ti, Tl, and U. Low air concentrations of metals (near or below instrumental detection limits) and/or inadvertent introduction of metal contamination are the main causes for excluding elements based on the pass/fail criteria. Uncertainty associated with elemental measurements must be assessed on an element-by-element basis.     

活性碳纤维改性技术研究进展

介绍了活性碳纤维(ACF)的孔结构及表面官能团,综述了国内外ACF改性技术的研究现状.ACF的改性主要包括孔结构调控和表面化学改性,表面化学改性包括氧化还原法、表面负载法、浸渍法、热处理法、远程等离子体处理法、微波辐照法等,也可将多种方法结合来对ACF进行改性,以改善和提高ACF的吸附性能.在总结现有研究的基础上,对ACF改性技术发展趋势进行了展望.